How to maintain the gluing part and folding part of the box gluing machine

1.How to maintain the gluing part and folding part of the box gluing machine?First,the width of carton gluing port and rubber wheel shall match. In the process of automatic box gluing, the width of the gluing port of the carton shall meet the requirements of the box gluing machine. Too wide or too narrow will affect the box gluing quality. Too narrow will cause glue overflow; If it is too wide, the pre folding will be affected to a certain extent. In addition, the concentricity of the rubber wheel shall ensure accurate packaging and anti-counterfeiting, and the knurling at the edge shall be free of wear to ensure uniform rubber application.

2.How to maintain the gluing part and folding part of the box gluing machine?Second,before gluing, ensure that the conveying route at the gluing edge of the carton is parallel to the conveyor belt.

3.How to maintain the gluing part and folding part of the box gluing machine?Third,the gap and gluing amount between the upper and lower rubber wheels shall be suitable for food packaging to ensure that the gluing layer is thin and uniform.

4.How to maintain the gluing part and folding part of the box gluing machine?Forth,the folding part is equipped with a folding transmission. If necessary, adjust the folding transmission to ensure accurate alignment of the adhesive joint.

5.How to maintain the gluing part and folding part of the box gluing machine?Fifth,the adhesive mouth coated with adhesive must not touch other parts of the machine, otherwise the glue will accumulate more and more in this part, and finally rub against the parts that should not be coated.

6.How to maintain the gluing part and folding part of the box gluing machine?Sixth,the gluing position shall be appropriate. If it is too far away from the crease line, the box is not beautiful. If it is too close, the position that should not be glued may be glued and bound, resulting in difficulties in box forming.