How to adjust the automatic carton folding and gluing machine?

Here are some tips about how to adjust the automatic carton folding and gluing machine.

1. To adjust the automatic carton folding and gluing machine, you should check the work order and samples carefully, determine the glue box used, and prepare it.

2. The width of the baffle should be adjusted, the sides should be parallel, and the semi finished color box to be produced is just put down. The sides of the baffle will be less than 1mm from the color box. Then the adjusting bolts should be adjusted to make sure that every paste product can pass smoothly without any fetters.

3. To adjust the automatic carton folding and gluing machine, you should adjust the slope and height of the pending box, so that the pending product can go smoothly without any fetters. Adjust the auxiliary guideway and the flow wheel after adjusting. Make its size suitable for the specification of the color box to be pasted.

4. To adjust the automatic carton folding and gluing machine, you should adjust the paste box belt and paste box guide rail, and then adjust the closing pressure of paste box host and wheel to cross fit with the belt.

5. Adjust the glue cylinder and check whether the glue is enough. The glue should be immersed in 80% of the rubber wheel, then adjust the glue cylinder and gluing position.

6. After commissioning the OK, 5 – 10 pre test machines are identified, and the speed of the machine is confirmed after confirming the position and forming specifications.

7. When pasting the box, pay attention to the paper feeding state of the box, and do not exceed the line, offline or dislocation, so as not to affect the appearance and forming effect of the color box.

8. First article confirmation: strictly follow the first article sample signing method.

9. After production, clean the machine and keep it clean.