Precautions for using flexo folder gluer machine

Several key points of process quality control of flexo folder gluer machine ：

1.Using flexo folder gluer machine, you should understand the work flow of rubber box, understand the work order, especially whether there are special requirements in the remarks column.

2.Conduct the first inspection on the pasted products and fill in the quality inspection record form in time

3.The flexo folder gluer machine shall not degumm, blister, false adhesion, oil stain and missing printing.

4.The number and height of finished products are the same, each plate is the same, the finished products are stacked neatly, and the finished product card is filled out in a standardized and clear manner.

5.The flexo folder gluer machine’s packaging direction and quantity of flexo folder gluer machine shall be determined according to the requirements of customers. Bad products of the same product shall not be used as backing paper, and pharmaceutical boxes and inferior cardboard shall not be used as backing paper.

6.There shall be no displacement, wire explosion and half threading. Special attention shall be paid to the products that need to be bonded after two molds.

7.The carton shall be formed with the seam thickness not exceeding 3mm and the corners and gaps less than 5mm. It shall be flat and clean without material shortage and bulge.

8.When you use the flexo folder gluer machine, the special products shall be in strict accordance with this operation instruction and used for special boards.

9.When you use flexo folder gluer machine to bond, first check the lining paper, and then check whether the corrugated on both sides is defective, whether the slotting at the shallow place is out of position, burst, and whether there are bumps and scratches.

10.The bonding is firm and not easy to stretch; The gap width is controlled at 3-9mm, and the standard gap width is 6mm; The distance between the tongue and the slot gap shall not be greater than 3mm, and the shear difference shall not be greater than 3mm.