The automatic box gluing machine will inevitably have problems in the process of box gluing and pasting. Only do a good job of maintenance in daily life, improve the performance of the equipment and minimize the occurrence of problems. It is important to know the solutions to common problems of automatic box gluing machine.The following is a list of common problems and solutions to common problems of automatic box gluing machine.

1. If the glue is not firm, you can check the amount of glue applied. If you apply too much or too thick glue, it will cause whitening. If you apply too little glue, it will cause weak glue.Therefore,one of the solutions to common problems of automatic box gluing machine is that you must grasp the amount by experience.

2. The surface of the plastic box is scratched, especially for small boxes, it is often difficult to crease with the belt. A layer of film can be covered first, but the adhesive edge cannot be covered, otherwise it is difficult to apply glue.

3. The gluing direction of the glue box is not correct, which needs to adjust the position of the glue box and the pressure balance of each part. One of the solutions to common problems of automatic box gluing machine is that you can be handled with the experience of the captain of the box gluing machine.

The above are three solutions to common problems of automatic box gluing machine. The application of full-automatic box gluing machine needs to master skills, try to avoid equipment failure and ensure the perfect effect of gluing boxes.