The full-automatic carton gluing machine folds the printed die-cut cardboard into the required shape and pastes each foot. The carton gluing machine box pasting replaces the traditional manual box pasting method, greatly reduces the labor cost and improves the work efficiency.

How to control the box pasting process of automatic carton gluing machine?Here are several tips about how to control the box pasting process of automatic carton gluing machine.

1. How to control the box pasting process of automatic carton gluing machine?First, take different measures for different processes. For example, for coated products, the penetration of adhesive can be ensured by using coated adhesive, grinding the adhesive mouth or molding point line at the adhesive mouth, so as to improve the fastness of paste box.

2. How to control the box pasting process of automatic carton gluing machine?Second, control the drying time of the adhesive. For fast drying adhesive, there is no such problem. For slow drying adhesive, sufficient drying time shall be reserved after inspection and packing, and a certain pressure must be given in the box.

3. How to control the box pasting process of automatic carton gluing machine?Third, control the coating amount of adhesive, and the coating thickness is usually controlled to 0.3mm, which can meet the requirements after being extruded and spread by the belt.

4. How to control the box pasting process of automatic carton gluing machine?Fourth, relieve the paste pressure. It is required that after passing through the paste belt area, no obvious indentation shall be formed on the surface of the carton or the dark reinforcement of the carton shall be crushed, and the dark reinforcement shall not spring away once it is released.